OPERATION - General
The appliance is intended only for domestic use,
not for professional use.
1. Steam gun
2. Extending tubes
3. Floor brush
4. Hose
5. Accessory compartment
6. Power light
7. Steam control light
8. On/Off switch
9. Handle
10. Pressure cap
11. Steam trigger
12. Kids-safety button
13. Housing
14. Window wiper
15. Large round brush
16. Small round brush
17. Adapters
18. Curved nozzle
19. Funnel
20. Measuring cup
21. Cleaning cloth
22. Power cord and plug
23. Extension big brush (packed seperately)
OPERATION - Before first use
Remove the vacuum cleaner from the packaging, and remove all packaging materials.
ATTENTION: Some parts are placed in the accessory compartment (5)!
OPERATION - Filling the tank with water
1. Disconnect the plug from the wall socket.
2. Unscrew the pressure cap (10) on the water tank
by turning it anticlockwise, and remove the cap.
3. Fill the water tank with maximum 1.5 litres water
(enough for 1hour steaming) with the help of the
measuring cup (20) and funnel (19) (see figure
2). We recommend that you use distilled water to
prevent lime deposits in the steam boiler. The use
of hot water reduces the power consumption.
4. Fit the pressure cap onto the water tank.
5. Fasten the pressure cap by turning it clockwise.
6. Dry the exterior of the water tank with a dry cloth.
OPERATION - Fitting the accessories
All accessory parts are provided with a locking mechanism. To this end, the locking plug is to be "clicked" into
the appropriate opening. To release the accessory, just press the locking part and pull it out. Should this prove
to be difficult we would recommend that you coat the parts with a little grease.
WARNING:
•
The accessories get hot when cleaning for a long time! You should be aware of this, especially when
changing accessories while cleaning.
2.
19.
6.
5.
4.
23.
3.
Attention: The handgrip may
get heated by the steam.
26
20.
21.
17.
14.
16.
15.
18.
9.
22.
8.
10.
7.
12.
11.
13.
1.
EN