Hella Gutmann mega macs X Guia De Inicio Rapido página 47

Hella Gutmann
4.2. First Use with an Independent Displaying Device
NOTICE
When starting the device for the first time and after every software update, you need to confirm the general
terms and conditions (GTC) of the Hella Gutmann Solutions GmbH. Otherwise, certain device functions will
be unavailable.
Proceed as follows to take the mega macs X into operation for the first time with an independent displaying device:
1. Switch on the mega macs X.
2. Switch on the independent displaying device (e.g. tablet or notebook).
3. Wait until the Wi-Fi indicator at the mega macs X is permanently green.
4. Establish the Wi-Fi connection (with QR code or manually) and call up the SDI diagnostic interface.
ð The two connecting possibilities are described below:
Establish the Wi-Fi connection and call up the SDI diagnostic interface – with QR code:
1. Scan the QR code on the housing of the mega macs X.
ð The Wi-Fi settings are indicated on the displaying device.
mega macs X
Putting the mega macs X into Operation | 4.
47