Descargar Imprimir esta página

Hella Gutmann mega macs X Guia De Inicio Rapido página 50

Ocultar thumbs Ver también para mega macs X:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 119
4. | Putting the mega macs X into Operation
2. Select the SSID macsx** (** marks the device number).
3. Enter the Wi-Fi password (key) and connect to Wi-Fi.
NOTICE
The Wi-Fi password (key) is additionally written on the type label at the back of the mega macs X.
4. Open the web browser and enter the following address in the address bar: http://macsx.
NOTICE
Should you use a displaying device with Windows operating system, then enter the address http://macsx.lo-
cal or http://192.168.4.1 in the address bar.
Connection cannot be established if http:// is not entered.
5. The SDI setup will start automatically in the next step to activate the mega macs X.
6. Select the Wi-Fi network.
7. Regard the window with information and instructions.
ð The LED progress bar flashes during connection setup.
ð Once the Wi-Fi connection is established, the message Wi-Fi connection has been successfully established is
displayed.
8. Select >OK<.
9. Select >Continue<.
10. Please enter the activation code and select >Continue<.
NOTICE
The activation code is going to be sent by e-mail in advance.
50
Hella Gutmann
mega macs X

Publicidad

loading