Hella Gutmann mega macs X Guia De Inicio Rapido página 48

4. | Putting the mega macs X into Operation
2. Confirm the indicated selection and connect with the mega macs X Wi-Fi.
ð Now the mega macs X is connected with the displaying device.
3. Scan the following QR code once to open the SDI diagnostic interface in a web browser:
NOTICE
It is recommended to use Google Chrome with version 78 or higher in connection with either Android or
Windows operating system.
The latest version of Safari web browser is presumed when using iOS.
ð The web page http://macsx is going to be called up automatically.
4. The SDI setup will start automatically in the next step to activate the mega macs X.
5. Select the Wi-Fi network (of the workshop).
ð The LED progress bar flashes during connection setup.
ð Once the Wi-Fi connection is established, the message Wi-Fi connection has been successfully established is
displayed.
6. Select >OK<.
7. Select >Continue<.
8. Please enter the activation code and select >Continue<.
NOTICE
The activation code is going to be sent by e-mail in advance.
9. Confirm the successful activation of the mega macs X with >Continue<.
10. Enter the company data and confirm with >Continue<.
11. Add a printer.
12. Call up the SDI diagnostic interface with
48
.
Hella Gutmann
mega macs X