Motorola Solutions PMMN4038 Manual De Instrucciones página 5

Receiving
When the RSM is connected to the radio accessory
connector, the radio speaker is muted, and the audio is
only heard from the RSM speaker. Similarly, when a
secondary receiver audio accessory is plugged into a
3.5mm audio jack, audio to the RSM is rerouted to the
secondary accessory.
Transmitting
To transmit using your RSM:
1. Press and hold the Push-To-Talk (PTT) button on the
RSM.
2. Speak into the RSM.
3. Release the PTT when finished.
Note: Connecting the RSM to the radio does not disable
the radio microphone and PTT.
Removing the RSM
Turn the radio off before removing the RSM from the radio.
Remember to reattach the radio accessory connector seal
to the side of the radio when an accessory is not being
used.
3