Kicker KXMA800.8 Manual Del Propietário página 3

core conductor
source unit
high-level speaker
outputs
+
–
Install a fuse within 7" (18cm) of the battery and in-line with the power cable connected to your amplifi er.
Model External Fuse
(sold separately)
KXMA800.8 1 x 120 Ampere
POWER WIRING
Amplifi er uses 304-stainless
steel screws and conformal
coated PCB for increased
weather resistance
ABYC-compliant power terminals
AMP3
BRIDGED
L + L - R + R -
AMP4 BRIDGED
2021 KXMA 8-CH Amp Rev C.indd 3 2021 KXMA 8-CH Amp Rev C.indd 3
to amplifi er
shield
Power/Ground Wire
4 Gauge
Use the FADER switches to select which inputs are active with
respect to their paired output. ON will activate the second input.
for example:
If you are using a single RCA pair of inputs, set all FADER
switches to OFF.
For any amp section being driven by additional RCA input(s), set
the FADER switch(es) to ON.
If you are using all four RCA pairs of inputs, set all FADER
switches to ON.
POWER
AMP1
GND REM +12V
L
AMP1/AMP2
FADER
R
ON OFF
audio inputs
external fuse
remote turn-on (see page 6)
KICKER KISL (optional)
OR
KICKER Wiring Kit
KMPK4, PK4, CK4
AUTO
AMP2 AMP3 AMP4
TURN-ON
AMP1
AMP2
12V/DC/AUDIO
INPUT
AMP2/AMP3 AMP3/AMP4
LEVEL
FADER FADER
ON OFF ON OFF LO/HI
≤7"
(18cm)
12V
battery
to amplifi er
from source unit high-
level speaker outputs
AMP1
BRIDGED
L + L - R + R -
AMP3
AMP4
INPUT
LEVEL
AMP2 BRIDGED
LO/HI
/ /
aluminum bottom plate
10/6/2020 7:10:58 AM 10/6/2020 7:10:58 AM
3