Franke FNO 605 BK Manual De Uso página 10

4. CONTROLS
Button Function
Turns the motor on/off at speed one.
A
Press the button to deactivate any speed.
B
Turns the Motor on at speed two.
Keeping the button pressed for approximately 2
seconds activates the Delay function.
Activates automatic switch-off (Motor+Lights) with
a 30' delay.
Can be activated from any position with the Intensive
function disabled.
It is disabled by pressing button B or button A for
approximately 2 seconds.
C
Turns the Motor on at speed three.
D Turns the motor on at INTENSIVE speed.
This speed is timed to run for 6 minutes. At the end
of this time, the system returns automatically to the
speed that was set before. If it is activated with the
motor turned off, it will switch to OFF at the end of
the time. To deactivate it, press button D once more
or press button A.
E
Turns the Lighting System on and off at maximum
intensity.
5. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
10
Led
Button on.
-
Buttons A+B are on.
Function ON: the respective buttons
A+ (B or C or D) flash once every
second.
Buttons A+C are on.
Button D flashes once every second
and button A stays lit.
Button on.