13. Trouble Shooting; 14. Technical Data - Metabo KS 254 Plus Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH

13. Trouble Shooting

This section describes problems and
malfunctions which you should be able
to resolve yourself. If the measures de-
scribed here do not solve your problem,
see 'Repairs'.
A
Danger!
Many accidents happen particularly in
connection with problems and faults.
Therefore please note:
Always unplug before troubleshoo-
ting.
Check that all safety devices are
operational again after each fault
service.

14. Technical Data

Voltage
Current draw
Fuse protection
Motor output (S6 20 % 5 min *)
Protection class
Degree of protection
Saw blade speed
Cutting speed
Saw blade diameter (outer)
Arbor bore
Dimensions
Machine in packaging (length × width × height)
Machine ready for operation, rotary table in 90° position
(length × width × height)
Maximum workpiece cross section:
Standard cross cuts (width / height)
Mitre cuts (rotary table 45°) (width / height)
Bevel cuts (track arm holder 45° left) (width / height)
Compound mitre cuts (rotary table 45° / track arm holder
45° left) (width / height)
Weight
Machine in packing
Machine ready to work
Permissible temperature for transport and storage
30
Motor does not run
No mains voltage
check cables, plug, outlet and
mains fuse.
No crosscut function
Transport lock activated:
Deactivate the transport lock.
Safety lock engaged:
Release safety lock.
Sawing performance too low
Saw blade blunt (possibly tempering
marks on blade body):
Saw blade not suitable for material
being cut (see section 'Technical Da-
ta');
Saw blade warped:
Replace saw blade (see section
'Maintenance').
V
A
A
kW
IP
-1
min
m/s
mm
mm
mm
mm
mm
mm
mm
mm
kg
kg
°C
Saw vibrates heavily
Saw blade warped:
Replace saw blade (see section
'Maintenance').
Saw blade incorrectly mounted:
Remove the saw blade and then
mount it again correctly (see chap-
ter "Care and Maintenance").
Saw squeaks during start-up
Drive belt tension too low:
Tighten the drive belt (see section
'Maintenance - Drive belt tensio-
ning').
Rotary table stiff
Sawdust build-up under rotary table:
Remove saw dust.
KS 254 Plus
KS 305 Plus
220–240
220–240
(1~ 50 Hz)
(1~ 50 Hz)
8.7
9.4
10 (time-lag)
10 (time-lag)
1.8
2.0
20
20
II
II
4700
4100
62
65
254
305
30
30
630 × 575 × 520
630 × 575 × 520
723 × 684 × 580
725 × 758 × 650
145 / 60
200 / 77
100 / 60
140 / 77
145 / 30
200 / 35
100 / 30
140 / 35
25
26
18
19
0 to +40
0 to +40
110–120
(1~ 60 Hz) (1~ 50 Hz)
15
16 (time-lag)
20
II
4100
65
305
1"
30
630 × 575 × 520
725 × 758 × 650
200 / 77
140 / 77
200 / 35
140 / 35
26
19
0 to +40

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ks 305 plus

Tabla de contenido