Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Features
Compressor Delay Protection
To protect the compressor, apart from when
the appliance and compressor are activated for
the first time after being turned on via the
power button, there will be a three minute delay
between every occurrence of the compressor
turning off and on.
Helpful Information
Issue
The appliance
is not operating.
Poor cooling.
Noisey.
15 | English
The compressor does not
work.
The remote control does
Cause
No power.
Water tank full.
Room temperature too low.
Room temperature lower than the
set temperature cooling mode.
Doors and windows are open or
there are other heat sources.
Dirty filters.
Air inlet or air outlet clogged.
There is direct sunlight.
Too far from appliance.
The remote control is not pointing towards
the receiving head of the remote control
Resolution
Connect the unit to a live
power socket and turn it on.
Drain the water stored in the unit.
It is recommended that this
unit be operated at 5-32°C.
Increase the set temperature
above the room temperature.
Close doors and windows and
remove other heat sources.
Clean filters.
Remove the obstruction.
Draw curtains.
Wait three minutes until the temperature
decreases and then turn on the unit..
Bring the remote control closer to the
appliance and ensure that the remote
control is pointing toward the receiving
Publicidad
