ProBreeze PB-AC04 Manual De Instrucciones página 9

Heat Exhaust Hose Installation
Align the left-hand short side of the
1.
rectangle heat exhaust hose connector
with the right-hand short side of the heat
exhaust hose connector.
Slide the rectangle heat exhaust
2.
connector to the left fully into the heat
exhaust hose connector.
3. The heat exhaust hose connector locking
clip will lock the rectangle heat exhaust
hose connector into place.
Sliding Windows Sealing Board
Assembly Installation
Adjust the sealing board assembly to the
1.
length or height of the window.
Open window and place the sealing board
2.
assembly into window.
Adjust to ensure an exact fit.
3.
Close window to lock everything into
place.
Attach the heat exhaust hose short
4.
connector to the elliptical hole.
The sealing board assembly is now ready
5.
for use.
Notes:
• If your window opening is smaller than the
minimum length of the sealing board assembly
trim to desired length using a hacksaw.
•
If your window opening is larger than the
maximum length of the sealing board assembly
use plywood or similar to fill the gap.
2 & 3
Panel B Panel A
1
Horizontal Window
2 4
3
5
Vertical Window
2
3
4 5
English | 04 English | 08