Publicidad
Idiomas disponibles
Idiomas disponibles
NOTICE
1.
Enter the quick-freezing function on state. After the quick-freezing function
runs to the set conditions, the refrigerator will automatically switch to the quick-
freezing function off state. If you want to exit manually, you can press the "E"
quick-cooling button to exit.
2.
Under the status of quick-freezing function, the freezing chamber temperature
cannot be adjusted. If the temperature adjustment button "D1" or "D2" is
pressed, the quick-freezing indicator icon "e1" flashes, accompanied by a
prompt tone, indicating that this operation cannot be performed.
3.
Under the status of quick-freezing function, the "intelligent" function cannot be
opened at the same time due to different controls. If the "intelligent" function is
set, the indicator icon „e1" of quick-freezing function will go out and the quick-
freezing function will automatically exit.
Filter function
When the refrigerator has been running for 6 months, the filter replacement icon
"c3" lights up, and the blue bar indicator light under the display panel flashes,
prompting the user to replace a new filter When the filter is replaced, please press
and hold the "C" button for 3 seconds, the buzzer will ring once, the filter
replacement reminder will be canceled, the filter replacement icon "c3" will go out,
and the blue bar indicator light will always be on.
Indicator on
Ice making mode
When the display screen is unlocked, press and hold the "E" quick-freezing button
for 3 seconds, the buzzer rings, the ice making indicator icon "e2" lights up, and the
ice making function of the refrigerator is turned on. When the ice-making indicator is
on, press and hold the "E" quick-freezing button for 3 seconds, the buzzer will ring,
the quick-freezing indicator "e2" will go out, and the ice-making function of the
refrigerator will be turned off.
Hold for 3s
Use
Indicator off
EN
19
Publicidad
