Publicidad
Idiomas disponibles
Idiomas disponibles
10.9 Electrical connection
Before each connection check if:
power supply, socket and fusing are appropriate to the rating plate.
the power socket is earthed and no multi - plug or extension.
the power plug and socket are strictly according.
Connect the plug to a properly installed household socket.
To avoid risks a damaged power cord must be replaced by the customer service (
EN
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see
warranty card)
10.10 Removing and installing the doors
In the event that you need to remove the appliance doors, please follow the door
removal and installation instructions below (Fig.10.10).
see warranty card).
WARNING!
Before any operation, deactivate the appliance and disconnect the mains plug from
the mains socket.
Block the water supply.
The applance is heavy. Always handle with at least two persons.
Do not tilt the appliance more than 45 or place it horizontally on the ground.
Before any operation, deactivate the appliance and disconnect the mains plug from
the mains socket.
Block the water supply.
The applance is heavy. Always handle with at least two persons.
Do not tilt the appliance more than 45 or place it horizontally on the ground.
The door may fall over and hurt people, or get damaged during these steps, please
pay more attention when rermoving and instaling doors.
26
Equipment
Publicidad
