Descargar Imprimir esta página

Pando PFBI COMBI 178x54 Manual De Uso página 112

Ocultar thumbs Ver también para PFBI COMBI 178x54:

Publicidad

Idiomas disponibles

Idiomas disponibles

INOXPAN S.L.
3.3.4 Holiday Mode
How Would It Be Used?
• Push "MODE" button until holiday symbol
appears
• If no button is pressed for 1 second.
Mode will be set. Holiday symbol will
blink 3 times. When mode is set, buzzer
will sound beep beep.
• Cooler temperature segment will show
"--".
• Holiday symbol and "--" will light till mode
finishes.
During This Mode:
• Freezer may be adjusted. When holiday
mode will be cancelled, the selected
setting values will proceed.
• Cooler may be adjusted. When holiday
mode will be cancelled, the selected
setting values will proceed.
• Super cool and super freeze modes can
be selected. Holiday mode is
automatically cancelled and the selected
mode is activated.
• Economy mode can be selected after
cancelling the holiday mode. Then the
selected mode is activated.
• To cancel, you will just need to press on
mode button.
• The freezer part will operate at -18Cº
and the fridge part at +8Cº. The coldest
part will not stop, it will only set the
highest temperature among the options.
3.3.5 Drink Cool Mode
Purpose
This mode is used to cool drinks within an
adjustable time frame.
How Would It Be Used?
• Press freezer button for 5 seconds.
• Special animation will start on freezer set
value screen and will blink on cooler set
value screen.
• Press cooler button to adjust the time (05
- 10 - 15 - 20 - 25 - 30 minutes).
• If no button is pressed within 2 seconds
the time will be set.
• The countdown starts from the adjusted
time minute by minute.
• The remaining time will be shown on the
display. When the countdown is finished, it
beeps continuously. Pressing any button
will stop this beeping.
• Remaining time will blink on the screen.
• To cancel this mode press freezer set
button for 5 seconds.
You can set the alarm to inform you
when the drink is ready.
3.3.6 Screen saver mode
Purpose
This mode saves energy by switching off all
control panel lighting when the panel is left
inactive.
How to Use
• Screen saver mode will be activated
automatically after 30 seconds.
• If you press any key while the lighting
of the control panel is off, the current
machine settings will reappear on the
display to let you make any change you
wish.
• If you do not cancel the screen saving
mode or press any key for 30 seconds,
control panel will remain off.
To deactivate the screen saving mode,
• To cancel the screen saving mode, first of
all, you need to press any key to activate
the keys and then press and hold the
Mode button for 3 seconds.
• To reactivate screen saving mode, press
and hold the mode button for 3 seconds.
112
FRIDGE - FREEZER

Publicidad

loading

Este manual también es adecuado para:

10335