Volpi V-BLACK VITA Manual De Uso página 21

WARNING:
Do not prepare the solution in the sprayer tank but always in a separate container.
Do not ever pour the solution into the tank without the use of the filter.
5.3. POSITIONING OF THE SPRAYER
Put the sprayer on a flat surface at a useful height, in order to put the sprayer on your shoulders easily, with the belts previously
adjusted.
If you need to adjust the belts, put the sprayer on a flat and raised surface, remove your arms from the shoulder belts and adjust
the length through the buckles.
5.4. SPRAYER START-UP
•
Turn on the pump by turning the knob W clockwise.
•
The red-colored led Z indicates that the machine is on.
•
The four green-colored leds T indicate the battery charging status.
o
4 leds = 100% battery
o
3 leds = 75% battery
o
2 leds = 50 % battery
o
1 led = 25 % battery
•
If the battery is low, recharge it following the instructions in section 6.2.
•
Move the lever on the handle to start spraying
•
Use the electronic pressure regulator W to manage the desired working pressure.
•
When releasing the handle lever, the pump stops automatically interrupting the spraying of the liquid
WARNING: The sprayer is equipped with electronic board with voltage control that keeps the set pressure constant
throughout the life of the battery.
Auxiliary socket S is the configuration for using the pump on trolley with the 4-nozzle spray boom (optional).
WARNING: Never let the sprayer work when the tank is empty.
WARNING: Avoid discharging the battery completely; when the battery is getting low, you need a full recharge.
Completely recharge the battery before storing the sprayer for a long time.
5.5. NOZZLE REGULATION
This sprayer is supplied with adjustable con nozzle F1.
Screwing or unscrewing the final part of the nozzle F1, it is possible to adjust the diameter of the "rose" spray until you get the
"jet".
DAVIDE E LUIGI VOLPI S.p.A. - Via San Rocco,10 - 46040 CASALROMANO (MN) – ITALY
pag. 21 di 80