Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
EN
OPERATING CONDITIONS
Test cell and grain MUST be free of any condensation
or surface moisture. Moisture on grain or in test cell will
cause high readings. Very hot or cool grain will pick up
moisture when it warms or cools.
Because grains are irregularly shaped and may not always
pack the same way in the test cell, minor variations in
readings may occur. To enhance accuracy, always take
three (3) successive readings of the total sample being
tested and average the results. Empty and refill the tester
with new grain fromthe sample between each test.
The tester is most accurate when grain and tester
are between 16˚C and 32˚C. For best results, grain
temperature should not be below 4˚C or above 43˚C.
Condensation on the grain or test cell is best avoided by having the tester and grain at
the same temperature.
SCREEN AND KEYBOARD
BUTTON FUNCTIONS
A - Power button is used to turn the tester on or off
B - Back arrow is used to go back to the previous menu. When the back arrow is
used any changes made in a previous menu will not be saved.
C - Up arrow is used to scroll up through a list of menu items or increment a value
D - Forward arrow is used in some menus to advance to the next item
E - Down arrow is used to scroll down through a list of menu items or decrement a
value
F - Enter button is used to select a menu item or accept and save changes made in a
menu
A
B
C
D
E
F
48
MT PRO PLUS manual_short version_SE_Agratronix.indd 49
2.4.2015 16:21:39
Publicidad
