Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
ble battery from heat (for example, from
continuous exposure to sunlight), fire, water
and moisture. There is a risk of explosion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never try to repair damaged batteries.
Batteries should only be maintained by the
manufacturer or an approved customer service
centre.
■
6
│
GB │ IE
Protect the rechargea-
Safety instructions for nibblers
■
Hold the tool with a firm grip.
■
Secure the workpiece properly.
■
Keep hands away from rotating parts.
■
The edges and chips from the workpiece are
sharp. Wear gloves. To prevent injuries, it is
also advisable to wear shoes with thick soles.
■
Do not place the tool onto the chips from the
workpiece. Otherwise the tool may be
damaged and malfunction.
■
Do not leave the tool running unattended.
Use the tool only when held in your hands.
■
Always ensure that you have a firm footing.
When you are working in an elevated position,
ensure that no-one is standing beneath you.
■
Avoid touching the grooved pin, the die or the
workpiece immediately after machining, be-
cause the parts will still be very hot and can
cause skin burns.
■
Avoid cutting electrical cables. This can lead
to serious accidents due to electric shock.
Original accessories/attachments
■
Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.
WARNING!
■
Do not use any accessories that are not
recommended by PARKSIDE. This can lead
to electric shock and fire.
PMKA 20-Li A1
Publicidad
