Publicidad
Idiomas disponibles
Idiomas disponibles
Dial the number (maximum 24 digits) and then press TALK key.
Direct dialling
Press TALK key to take the line and then dial the number (maximum
24 digits).
call from redial list
Press REDIAL key in idle mode.
Press the Navigation key to an entry in the redial list and then press
TALK key.
call from the call log
Press CALL LOG (UP) key in idle mode.
Press the Navigation key to an entry in the call list and then press
TALK key.
Note: You need to subscribe to Caller Line Identification service to be
able to see the caller's number or name in the call log.
call from the phonebook
Press PHONEBOOK (DOWN) key in idle mode.
Press the Navigation key to an entry in the phonebook and then press
TALK key.
answer and end a call
1. When the phone rings, press TALK key.
2. To end a conversation, press HANG-UP/EXIT key.
Warning: When the handset rings during an incoming call, please do
not hold the handset too close to your ear as the volume of the ringing
tone may damage your hearing.
IMPORTANT NOTE: You can simply place the handset back on its
base station or charger pod to end the call.
Make sure that you have not deactivated the auto hang-up feature.
adjust the earpiece volume
During a call, press the Navigation key to select from VOLUME 1 to
VOLUME 3.
Mute/unmute microphone
When the microphone is muted, the handset displays MUTE ON, and
your caller cannot hear you.
During a call, press the MUTE key to turn on/off the microphone.
Paging The paging feature enables you to locate a missing handset if
the handset is in range and contains charged batteries.
Press HANDSET LOCATOR key located at the back of the base
station. All the registered handsets start to ring.
Pg. 11
Publicidad
