need to replace the batteries. Check the connection between the base
unit and the mains power socket.
"i try to recharge the batteries but i still get a warning that they
are low"
You need to replace the batteries. Dispose of used batteries safely – nev-
er burn them, or put them where they could get punctured.
Do not use non-rechargeable batteries in your handset – they may ex-
plode, causing damage. If the fault persists... Disconnect all other instru-
ments connected to the same line and try to make a call. Disconnect
the base unit from the telephone line and plug a different phone into the
master telephone socket. Try making a call. If this works,
the line is OK. If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone directly into the socket. If
the call now works, the adapter may be faulty. If you cannot make a call,
the fault may be onthe exchange line. Contact the service provider.
if the fault persists...
Disconnect all other instruments connected to the same line and try
to make a call.
Disconnect the base unit from the telephone line and plug a differ-
ent phone into the master telephone socket. Try making a call. If this
works, the line is OK. If the call does not work, and you are using a
two-way socket adapter, remove it and plug a telephone directly into
the socket. If the call now works, the adapter may be faulty. If you
cannot make a call, the fault may be on the exchange line. Contact
the service provider.
Pg. 30