Publicidad
Idiomas disponibles
Idiomas disponibles
3. Press the Navigation key to select SETTINGS and then press OK
key to select.
4. Press OK key to enter the RING DELAY option list.
5. Press the Navigation key to select 2 – 7 RINGS or ECONOMY and
then press OK key to confirm your choice.
6. A confirmation beep is played. Press HANG-UP/EXIT key to go
back to idle mode.
* If you select Economy mode, the answering machine will answer
calls and start playing the greeting message after 5 rings if you have
no new messages, or after 3 rings if there is at least one new message
recorded.
To activate/deactivate remote control access
1. Press the MENU key to enter menu selection.
2. Press the Navigation key to select ANSW MACHINE and then press
OK key to select.
3. Press the Navigation key to select SETTINGS and then press OK
key to select.
4. Press the Navigation key to select REMOTE ACC. and then press
OK key to select.
5. Press the Navigation key to select ACTIVATE or DEACTIVATE and
then press OK key to confirm.
6. A confirmation beep is played. Press HANG-UP/EXIT key to go
back to idle mode.
* Once the remote control access is activated, you can check the
messages
of your answering machine when you are away from home, by calling
from another phone.
* If the answering machine is turned off, you must change your mas-
ter PIN from its default 0000, before you can use the remote access
feature.
To check messages remotely
1. When you are away from home, dial your home phone number from
another phone. The answering machine answers and starts playing
your greeting message.
2. While the OGM is playing, press # key on the phone you used to
dial and enter the remote access code (which is the same as your
master PIN code).
* The answer machine will drop the line immediately if there is no de-
tection of the master PIN entry within 8 seconds from pressing the #.
Pg. 26
Publicidad
