A DECE OASIS A20F Beast Manual De Instrucciones página 10

Adjustment methods of each part
Note: Before using the bicycle, insert the ey and turn it countercloc wise by 45 , the battery is activated.
Finished using the bicycle, turn the ey 45 cloc wise, the battery is powered o , and ta e out the ey.
emove the battery step, insert the ey, press it upward and then rotate it 90 cloc wise. Note that need
to remove the ey and then ta e out the battery to avoid damaging the ey.
3.Take out the battery and charge the
battery separately
VIII.Instructions for using the code table:
1. Long press Power key for 3 second to switch on/off the ebike;
2. In the power-on state, press POWER KEY, the multi-function area will display ODO, TRIP, TIME.
ODO: Total mileage of this bicycle
TRIP: Miles since the ride
TIME: Start-up time of this ride
3. Press the "+" button to increase the gear. The higher the gear, the faster the speed.
4. Press the "-" button to lower the gear. The lower the gear, the slower the speed.
5. PAS gear: (After pedaling to 6 km/h, start the power assist)
Gear 1: Max 15km/h
Switch on/off
Gear 2: Max 20km/h Gear 3: Max 25km/h
Assist gear
4. You can also choosevehicle
ed light indicates normal charging reen
light indicates charging completed
Vehicle status
Battery power
Speed display
charging
Multifunctional display area
08