Important safety information
User
This device may be used by persons (including
children over 8 years of age) with reduced physical,
sensory or mental abilities or lack of experience and
knowledge, if they are supervised or instructed
regarding the safe use of the device and understand
the dangers that may arise. Children may not play with
the device. Cleaning and user maintenance of the
device may not be performed by children without
supervision. Keep packaging films out of the hands of
children. There is a danger of suffocation.
Batteries
Keep batteries out of reach of small children. If a
battery is swallowed, you must seek medical attention
immediately. Batteries/rechargeable batteries must
always be inserted in the correct polarity. If necessary,
clean the battery and device contacts. Never attempt
to recharge non-rechargeable batteries. Never short-
circuit or attempt to open batteries. Never throw
batteries into fire as they may explode.
If the device will not be used for an extended time
period, remove the battery and store the device in a
dry and dust-free area. Improper use of the battery
can lead to explosion or leakage.
If the battery leaks, avoid contact with skin, eyes and
mucous membranes. Use gloves. If you are exposed to
battery acid, rinse the affected areas with plenty of
clean water and immediately seek medical attention.
Remove discharged batteries from the device as they
present an increased risk of leakage.
- 27 -
Cleaning instructions
Clean the wristwatch with a soft, dry and lint-free
cloth. A glasses cleaning cloth is ideal.
Time setting
Carefully pull the crown out all the way. Turn the
crown clockwise or counter clockwise to set the time.
Press the crown back to the case to complete the
setting.
Shortening the band 2-LD3885-3
To shorten the band, two removable links are included.
Open the fastener of the band and the fastener of the
removable link. Remove one or two links and re-close
the fastener of the band.
Replacement of battery (SR626SW)
Battery replacements must be performed by an expert
to avoid damaging the case or gaskets.
Water resistance
Water resistant up to 3 bar. The bar value specifies the
atmospheric overpressure which is applied during
testing (DIN 8310).
- 28 -