Quattro CM-071 Guia De Instalacion página 14

Operation - Safety Guidelines cont.
DO always apply the handbrake after manoeuvring, before disengaging the drive rollers from the tyres.
DO NOT rely on the mover to act as a brake.
DO NOT exceed the stated maximum Safe Working Load (SWL).
DO NOT attempt to move or tow your vehicle with the motor movers engaged on the wheels.
DO NOT make any modifications on the caravan mover (mechanical or electronically). This can be
very dangerous! No warranty claim will be accepted and we cannot guarantee the function of the
mover if any modifications are made. Purpleline LTD are not liable for any damage whatsoever caused
as a result of incorrect installation, operation or modification.
Always ensure that you are close enough to engage the caravan's handbrake, particularly
when manoeuvring on uneven terrain and gradients/slopes, in case of mechanical failure.
Do not use the mover as a brake, when you have finished manoeuvring always engage the
caravan's handbrake.
Warning! Ensure that there are no persons or obstructions in the vicinity of the caravan prior
to use.
If in doubt regarding any feature of the mover system and its operation, contact your mover
dealer.
Operation - Handset Functions
Using Fig.1 for reference, familiarise yourself with the layout of the Remote Control Handset (1).
Power:
Fig.1.A = Power Button (double press)
Movement Controls:
Fig.1.C = Forward [F]
Fig.1.E = Forward Left [FL]
Fig.1.G = Reverse Left [RL]
Engagement Controls:
Fig.1.I = Engage Button [ENG]
Fig.1.K = Auto-Engage Function Button [FN]
The Remote Control handset (1) is powered by two 'AAA' 1.5V batteries, to install these, slide off the
back case of the handset as seen in Fig.2. Ensure only leak proof batteries are used. Check with local
authority regarding the correct disposal of used batteries. Remove batteries from handset during long
periods of inactivity.
Double press the power button (Fig.1.A) to turn the handset on. Once activated the LED (Fig.1.B) will
illuminate. If the handset has not been used 60 seconds it will power off.
Fig.1.B = Indication LED
Fig.1.D = Forward Right [FR]
Fig.1.F = Reverse Right [RR]
Fig.1.H = Reverse [R]
Fig.1.J = Disengage Button [DENG]
EN 14