Levolor Real Wood Instalación página 10

INSTALLATION
OUTSIDE MOUNT (OM)– BEFORE YOU BEGIN
PAIR SHADE BEFORE INSTALLING
REMOTE CONTROL
•
Use the – and + buttons to select the channel.
•
Use a paperclip to press and hold the
programming button inside the headrail for
about 2 seconds until the blind jogs once.
•
In the next 10 seconds, press and hold the stop
button  on the remote until the blind jogs twice.
USING THE INMOTION APP
•
If you purchased a hub, download the LEVOLOR
InMotion app to get started.
™
•
Blind can be directly paired to app, but it is
recommended to pair to remote first.
OUTSIDE MOUNT (OM)
End
bracket
STEP 1: MARKING THE BRACKET LOCATIONS
IMPORTANT: The brackets must be flush against a flat mounting surface. Do NOT
mount brackets on curved molding.
•
Position the box brackets at each end of the headrail
•
Position the center support bracket (if included) in the center if using only one. If more
than one center support bracket is included, space them evenly along the headrail.
•
Use a level to ensure all brackets are even and aligned. Mark the bracket mounting
hole locations, two per bracket, making sure they are square and equally spaced.
10
Motorized Tilt Operation
Center support bracket(s)
(if included)
Programming
Button
Inside Headrail
Home