Levolor Real Wood Instalación página 13

VALANCE INSTALLATION
•
Locate the valance clip location
indicators on the backside of the
valance that read "Clip Here."
•
Insert the clips into the groove on the
backside of the valance. Rotate so
that the end marked "TOP" arrow is
pointing up.
•
For returns, insert L-shaped return
clip into the groove on the backside
of the valance return. Align and
insert the other end of the L-shaped
return clip into the groove on the
backside of the valance.
•
Align the clips with the slots on
the bottom of the headrail and
clip into place.
HOLD-DOWN BRACKETS INSTALLATION (optional)
•
Ideal for doors, hold-down brackets
prevent blind from swaying.
Assemble as shown to each side
of bottom rail.
Home
Hold-down
Inside Mount
Return clip "Top" or
(OM only) arrow end
Return clip
(OM only)
pin
Outside Mount
Motorized Tilt Operation
INSTALLATION
Valance clip
Valance
Slots
Starter hole
13