Levolor Real Wood Instalación página 14

OPERATION
REMOTE OPERATION
•
Scan for remote guide.
BATTERY CHARGING
•
The rechargeable battery mounts
between the headrail and valance.
•
For easier access to the charging port,
a removable magnetic charging insert
has been installed during production.
Attach the magnetic charging adapter
to the micro-USB charging cable and
power adapter before connecting to
battery to charge.
•
For standard charging, remove the
magnetic charging insert from the
battery. Use the micro-USB charging
cable and power adapter to charge
battery.
•
Indicator light battery status:
– Low (red flash)
– Charging (green flash)
– Charged (green solid)
•
It is recommended to fully charge battery prior to first use.
LIFT OPERATION
NOTE: Lift control may be corded or cordless depending on what was selected
when ordering.
•
Corded Lift: To raise the blind, pull cord in toward the center of the blind to release
the lock; this allows you to raise and lower the blind. Once the blind is
at the desired height, pull the cord away from the center to lock into position.
•
Cordless Lift: To raise the blind, firmly press and hold the LEVOLOR button
located on the bottom rail and lift the blind to the desired height. Once the desired
position is reached, release grip on the button to lock blind in place.
14
Motorized Tilt Operation
Remove for
standard
charging
Bottom
View
Home