Levolor Real Wood Instalación página 15

REMOVING THE BLIND
•
Fully raise the blind. Remove valance from headrail.
•
Unplug battery from motor and remove from clips.
•
Unlock and lift the front clips of each end box bracket and slide the headrail
out of the brackets.
•
If center support brackets are used, lift the front of the headrail up to clear the
channel of the bracket and slide out forward.
•
Uninstall remaining brackets if necessary.
CAUTION: Hold blind firmly when removing. Failure to do so may result in
!
the blind falling and possible injury.
Home
UNINSTALL
Motorized Tilt Operation
15