MCS Master CF 75 Manual De Uso Y Mantenimiento página 17

maintenance interventions when run-
ning.
••2.25.Do not open the side inspection
doors and carry out work inside when
the heater is in operation or when it is
powered on and not in operation.
••2.26.If you smell gas, switch the
heater off immediately, stop the gas
supply, disconnect the heater from the
electricity mains, provide fresh air by
opening doors and windows and then
contact the authorised technical sup-
port centre.
••2.27.When the heater is controlled
by a remote room thermostat (optional
item), the heater can switch back on at
any time when the temperature drops
below the set threshold.
••2.28.If the heater is not used for an
extended period of time, we recom-
mend contacting the authorised tech-
nical support centre to put it back in
operation.
••2.29.The heater must only be fitted
with original accessories. The manu-
facturer is not responsible for any
damage deriving from improper user
of the heater and use of non-original
materials and accessories.
••2.30.Do not modify or tamper with the
heater as this may lead to hazardous
situations. The manufacturer will not
be held liable for any damage caused.
••2.31.Do not place any objects on the
heater.
••2.32.Do not insert objects through
the heater's grids.
••2.33.Do not touch the air outlet grid,
as during normal operation it can reach
high temperatures, which may cause
serious injury.
••2.34.Do not use adapters, multi
socket outlets and extensions to con-
nect the heater to the electricity mains.
••2.35.Do not perform any cleaning
and maintenance before plugging out
the heater from the electricity mains
and fuel supply.
••2.36.Ask the technical support ser-
vice to check that the heater is work-
ing properly at least once a year and/
or as required.
►►3.UNPACKING
DO NOT THROW AWAY THE MATERI-
ALS (CARDBOARD, PLASTIC PACK-
AGING, BAGS, ETC.) OR GIVE THEM
TO CHILDREN OR LEAVE THEM WITH-
IN THEIR REACH, AS THEY MAY REP-
RESENT A HAZARD.
Remove all packaging material used to
deliver the heater and dispose of it in com-
pliance with current standards. Check for
any damage undergone during transport.
If the heater looks damaged, inform the
dealer immediately.
►►4.HANDLING
THE HEATER MUST BE HANDLED BY
QUALIFIED PERSONNEL BY USING
SUITABLE DEVICES AND INSTRU-
MENTS, IN ACCORDANCE WITH NA-
TIONAL REGULATIONS AND CUR-
RENT STANDARDS.
►4.1.HANDLING THE HEATER WITH
THE PACKAGING
It can be lifted with a forklift truck by posi-
tioning the supports under the lower base
of the packaging.
►4.2.HANDLING THE HEATER WITH-
OUT THE PACKAGING
It can be lifted with the forklift truck by
positioning the supports underneath the
lower base of the packaging or by using
chains and suspension hooks.
en
it
de
es
fr
nl
pt
da
fi
no
sv
pl
ru
cs
hu
sl
tr
hr
lt
lv
et
ro
sk
bg
uk
bs
el
zh