Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
WARNING:
Read the ENTIRE IMPORTANT SAFETY INFORMATION
section at the beginning of this manual including all
text under subheading therein before maintenance this
product.
GENERAL MAINTENANCE
1. Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use.
2. Use clean cloths to remove dirt, dust, lubricant, grease,
etc.
FUEL CAP AND TANK AND LINES
WARNING:
serious personal injury.
performance. If performance improves when the fuel
clogged.
SPARK PLUG REPLACEMENT
CAUTION:
threading will seriously damage the product.
plug with .025 in. electrode gap. Use a recommended or
CHANGING ENGINE LUBRICANT
WARNING:
Do not change engine lubricant while it is hot. Accidental
contact with hot engine lubricant could result in serious
burns.
To change the engine lubricant:
before proceeding.
cover and set aside.
12
NOTE: Drain the lubricant while the engine is still warm
more completely.
Engine Lubricant section previously in this manual.
Reinstall the engine cover. Replace the screws and
tighten securely.
NOTE: Used lubricant should be disposed of at an
approved disposal site. See your local retailer for
more information.
STORING THE PRODUCT
Clean all foreign material from the product. Store idle unit
indoors in a dry, well-ventilated area that is inaccessible
to children. Keep away from corrosive agents such as
garden chemicals and deicing salts.
Abide by all ISO and local regulations for the safe storage
and handling of gasoline.
MAINTENANCE
WWW.SENIXTOOLS.COM
Publicidad
