Senix BLV4QL-M Manual Del Operador página 7

ASSEMBLY
ASSEMBLY
INSTALLING/REMOVE THE BLOWER TUBE
CAUTION:
Align the slots on the upper end of the upper blower tube
with the bumps on the blower outlet .Insert the upper
blower tube into the blower outlet. While holding the
into place (Fig. 1).
Align the slots on the lower blower tube with the bumps
on the lower end of the upper blower tube. Install the
lower blower tube onto the upper blower tube .
While holding the upper blower tube, twist the lower
tube from the blower outlet (Fig. 3).
While holding the upper blower tube, twist the lower
blower tube. Remove the lower blower tube from the
upper blower tube.
WWW.SENIXTOOLS.COM
Fig. 1
Fig. 2
Fig. 3
7