Descargar Imprimir esta página

Taurus HORIZON 23 Instrucciones De Uso página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
temperature value according to the values in
the cooking table.
Set the timer to manual or automatic cooking.
Introduce the grid or cooking tray according to
the cooking you want to perform in the oven.
When the timer is set to the desired time, you
will hear a warning sound at the end of cooking
and cooking will end.
Select the function
The Function selector (A1) allows you to select the
oven functions. Along with the function selector
button, you need to set the oven thermostat
button to a temperature value you have chosen.
Otherwise, the function button you selected will
not work.
(
) – Lower heater. Suitable for pizza and water
bath cooking.
(
) – Only grill. Suitable for patries, cakes, and
cooking with a single tray.
(
) – Both heaters on. Suitable for cooking pizza
and meat.
Select the cooking time
The timer (A2) allows you to set the cooking time.
When the time you set expires, the timer will cut
off the electricity of the heaters and cooking zone
and give a warning with a ringing sound. To turn off
your device, set the timer, program and thermostat
button to its off position (
The always-on function ( ) will keep the appliance
running without automatic stop.
NOTE: If it is desired to set the timer in less than
10 minutes, first of all, the timer button should be
turned 90 degrees and then it should be brought to
the desired time.
Select the temperature
The thermostat (A4) provides the temperature
range in the oven. It is used with the oven
programmer control button. When the temperature
inside your oven reaches the value you set, the
thermostat switches off and the thermostat light
turns off. When the temperature drops below the
set value, the thermostat is activated again.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Turn the appliance off, placing the function
selector in (
)
Unplug the appliance from the mains.
Clean the appliance.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
It is advisable to clean the appliance regularly
and remove any food remains.
If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
Neither parts of this appliance are suitable for
cleaning in the dishwasher.
The following pieces may be washed in a
dishwasher (using a soft cleaning program):
-
-
Then dry all parts before its assembly and
storage.
, 0 , 0 ).
Square tray
Grid

Publicidad

loading