Publicidad
Idiomas disponibles
Idiomas disponibles
3. Add device
Connect via Bluetooth (recommended):
Turn on Bluetooth and Location on your phone. Once
the app is open, if the device light is flashing, you will
get a screen to say it has detected a new device, hit
"Go to add", "Add", select your Wi-Fi network from the
app, enter the password and click "Next". Follow the
application steps to finish the installation.
Note: Despite making the connection via Bluetooth, the device
will connect to the router's Wi-Fi network, allowing you to control
the device from anywhere at any time. If the New Device Detected
screen does not appear, close the application completely and open
it again.
Connection via EZ Mode (standard):
Activate Phone Location. Once the application is open,
press" + "or "Add device", select the purchased product
to enter the installation wizard. Check that it flashes
quickly, if not, follow the app prompts to reset it, tick
the "Flashing quickly" tick and press "Next". Enter the
password, click "Next" to enter the network connection
process and follow the instructions of the application to
finish the installation.
11
English
Publicidad
