Descargar Imprimir esta página

muvit io MIOCLF001 Manual De Instrucciones página 58

Lámpara de techo con ventilador

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Can I control the device via 2G/3G/4G mobile
network?
The LED Wi-Fi lamp and the mobile device must be
under the same Wi-Fi network when the LED Wi-Fi lamp
is added for the first time. After successful configuration
of the device, you can control it remotely via 2G/3G/4G
mobile network.
3. How can I share my device with my family?
Open the application, go to "Profile" -> "Share device" ->
"Sent", tap "Add shared device", now you can share the
device with added family members.
4. How to reset this device?
Factory reset: after installing the ceiling lamp, switch on,
switch off for 3 seconds, switch on, switch off again for
3 seconds and switch on for factory reset until the light
flashes rapidly.
Lamp status indicator lights:
Fast flashing (twice per second): Fast mode
setting is initiated.
Slow flashing (once every three seconds): AP
mode setting is initiated.
WARRANTY & TECHNICAL ASSISTANCE SERVICE
Terms and Conditions
innov8 Iberia guarantees the hardware and software*
included in this product for the term of three (3) years
in all its parts, against any defect of manufacture and
operation from the date of delivery to the final consumer
and without any cost for this one.
To make this warranty effective, no further requirements
should be demanded than the shipment of this product
together with this warranty and the invoice or proof of
purchase.
*Warranty on software applicable to the software that contains the
physical product, not on the control application (APP) within the
consumer's mobile devices.
17
English

Publicidad

loading