Descargar Imprimir esta página

Powersmart DB5021LED Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

Working on pebbles, gravel, or unpaved surfaces-To avoid throwing loose surface material along with the
snow, push down on the raise the scrapper at the base of the unit above the pebbles or gravel.
CHANGING THROW DIRECTION AND THROW HEIGHT
WARNING
Never direct the snow discharge chute at the operator, at bystanders, at vehicles or at nearby windows.
Discharge snow and foreign objects accidentally picked up by the snow thrower can cause serious damage and
personal injury.
Always orient the discharge chute in the opposite direction from where you, bystanders, surrounding vehicles,
or windows are located.
1. The discharge chute (H) can be adjusted 180 degrees
by rotating the chute crank. Rotate the chute control
crank clockwise to move the discharge chute (H) to
the left, counterclockwise to move the chute to the
right.
2. The chute deflector on the top of the discharge chute (H) controls the height of the snow stream. Loosen
both chute deflector knobs to raise or lower the deflector to the desired height you wish to throw the snow.
Tighten the knobs to secure the deflector.
Note: Do not over tighten the chute deflector knobs.
10
H

Publicidad

loading