Publicidad
Technical Data
Power Requirements
General Power Tool Safety Warnings
Safety Warnings for the use of pneumatic
compressors
Parts
Preparation
Start Up
Maintenance
Troubleshooting
Authorized Service Centers
Warranty Policy
Use and care recommendations
NEVER EXCEED the maximum pressure rating (PSI) of the tool or accessory
being worked on.
DO NOT OPERATE THE COMPRESSOR WITHOUT OIL.
Using a lubricating oil other than SAE-30 will void the warranty.
IF THE COMPRESSOR DOES NOT OPERATE AFTER A PROLONGED TIME OF
INACTIVITY, turn off the thermal switch as indicated on the label attached to the tank.
If the compressor still does not run or does not turn on, contact an
Authorized
ASSEMBLE the wheels and front support to keep the compressor level.
Perform periodic MAINTENANCE to your machine (page 9).
2
ENGLISH
3
3
To gain the best performance of
the tool, prolong the duty life,
4
necessary, and to avoid hazards
of fatal injuries please read and
5
understand this Manual before
6
7
8
The illustrations in this manual are for reference
only. They might be different from the real tool.
9
10
11
12
Service Center.
Contents
CAUTION
make the Warranty valid if
using the tool.
Keep this manual for future references.
Publicidad
