Cembre TW-18B Manual De Uso Y Mantenimiento página 10

EMERGENCY ON/OFF button (7)
Located on the motor in a position clearly visible to the operator, it can be activated quickly in case of
emergency.
Press the button to switch on the tool: the display will turn on, showing the main information.
Press again to switch off: the display will turn off.
AUTO-SHUTDOWN: in order to optimise the battery life, a timer will disconnect the power
supply if the tool is inactive for a period of 5 minutes; To reactivate the tool, press the
button (7) again.
5 min.
Start button (8 and 14)
Press to start the motor with clockwise or counterclockwise rotation.
Safety lock (9 and 13)
Press to unlock the mechanism that prevents the tool from being activated accidentally.
The start button must be pressed at the same time as the safety lock.
Menu selector (10)
Only works when the display is turned on:
Can be turned either clockwise or counterclockwise
in order to select the various menu screens.
Press to access the chosen screen then turn to
select the desired value highlighted in light blue.
Press to confirm the selection or the chosen value.
TW-18B
LED colour display (11)
The high-brightness colour display turns on when
01/01/2022
the torque wrench is switched on and turns off au-
08:00
tomatically after a period of inactivity. It shows:
- The main operational parameters of the
tool.
- Information on the condition of the tool.
- Type of work to be carried out.
FASTENER SEQUENCE
- Any operational or procedural alerts (See § 8).
200-250Nm 000000
W SFSF ON
01/01/2022
08:00
4. CONTROLS / INDICATORS (See Fig. 1 and 4)
JOB
000000
direction date /time
of rotation
01/01/2022
RUN
FASTENER
200-250Nm
W SFSF ON
tightening torque
type of fastening
sequence of progress along the track
EN
01/01/2022
CLICK
battery charge level
08:00
SEQUENCE JOB
000000 000000
Job No.
data logging ON or OFF
08:00
CLICK
1sec.
10
bar
progress
fastening
10