Cembre TW-18B Manual De Uso Y Mantenimiento página 12

KS
01/01/2022
08:00
SSSS
PUSH
FFFF
SSFF
SFSF
FREE
SSSS
01/01/2022
08:00
PUSH L
01/01/2022
08:00
N
K
W
START
TOT: 002h24m
KS
PAR: 000h56m
Long push for reset
01/01/2022
08:00
SSSS
01/01/2022
08:00
FFFF
SSFF
SFSF
ON
FREE
START
01/01/2022
08:00
01/01/2022
08:00
TOT: 000517
PAR: 000000
TOT: 002h24m
PAR: 000h00m
01/01/2022
08:00
Operator progress (for work certification only)
Determine how the operator will advance along the track during the work by choosing
01/01/2022
08:00
between:
SSSS
SSSS = fastening of attachments on the internal side only
FFFF
FFFF = fastening of attachments on the external side only
SSFF
SSFF= fastening of 2 consecutive attachments on the internal side and 2 on the
SFSF
FREE external side
START
SFSF = fastening of one attachment on the internal side and one on the external side
FREE = progress freely
TURN
FFFF
TOT: 000517
PAR: 000000
TURN
01/01/2022
08:00
N
W
START
PUSH L
KS
01/01/2022
08:00
SSSS
Recording of work or JOBs (for work certification only)
FFFF
Select:
SSFF
ON to enable the data recording before carrying out the work.
PUSH
SFSF
OFF
OFF to stop recording after the work has been completed.
FREE
If recording is not necessary, keep OFF.
TURN
Work cycles
TOT: total no. of cycles completed since the first start-up of the tool.
01/01/2022
PAR: partial no. of cycles
Press the selector (10) for at least 3 seconds to reset the
PUSH
partial counter: 000000.
TURN
Time
total and partial tool usage time expressed in hours (h) and minutes (m)
Press the selector (10) for at least 3 seconds to reset the partial counter: 0h
00m.
JOB FUNCTION NOT AVAILABLE
KS
PUSH
SSFF
PUSH
01/01/2022
08:00
K
W
START
TOT: 002h24m
PAR: 000h00m
01/01/2022
08:00
SSSS
01/01/2022
08:00
FFFF
SSFF
SFSF
ON
FREE
PUSH
08:00
Turn the button to set the brightness.
Push to confirm.
PUSH
EN
KS
01/01/2022
08:00
SSSS
FFFF
SSFF
SFSF
FREE
SFSF
N
K
START
KS
JOB FUNCTION NOT AVAILABLE
OFF
The validity of the calibration
Contact an authorized CEMBRE service
center to carry out ordinary maintenance.
01/01/2022
08:00
FREE
START
has expired.
01/01/2022
08:00
PUSH
12