Publicidad
Allen screws
Blade set up
• The opening of the blade support should be free of sawdust.
• Turn the lever to the right to open the blade support.
• Insert the blade all the way in the blade support. The backside
of the blade should be set into the roller guide slot.
• Turn the lever to the left to close the blade support.
6
ENGLISH
Speed
control
Protection
bar
Blade
Roller guide
support
Preparation
Parts
Handle
Lock-on button
Switch
action control
Screws for
Base
adjustment of
plate
cutting angle
Parallel guide
Allen
key
Power cord
protector
Balancing
Vacuum
cleaner adapter
This jig saw uses T-shank
blade. To get better cutting
results make sure to use the
adequate blade for the
material and cut to be made.
Power cord
Publicidad
