Crux ARTISAN Serie Manual De Instrucciones página 7

BEFORE USING FOR THE FIRST TIME
1. Remove all packaging material and clean the blade as described in the chapter "Cleaning".
2. Wash the blending shaft and the whisk attachment in soapy water. Rinse and dry thoroughly.
CAUTION: Do not touch blades. The blending shaft attachment is very sharp. Use extreme care
when handling. Failure to do so can result in personal injury.
When the battery inidicator(1) LED flahsing in red and blue, the unit will stop working to avoid
overheating, please allow cool for about 1 hour
3. The housing may be wiped with a damp cloth.
CAUTION: Do not immerse motor housing in water or other liquids.
CAUTION: When the battery indicator LED (1) display is red, it indicates the appliance has a low
battery. You shall recharge it by placing the charge base (7) and connect the power outlet for
charging.
NOTE: The included battery pack is semi-charged.
CAUTION: DO NOT PLACE FINGERS ON BLENDING BLADE. The blades are very sharp
Before use, ensure that you fully charge the included battery pack completely prior to using
for the first time.
OPERATING INSTRUCTIONS
IMPORTANT: Blades are very sharp, handle with care. Ensure the immersion blender is unplugged
from the power outlet before assembling or removing attachments.
1. To assemble the detachable blending shaft to the motor handle, align the arrows
on the blending shaft and motor handle. Once aligned, press and hold the button above
the arrow on the motor handle and connect the detachable blending shaft and motor handle
together. Release the button once connected. (See Figure 2)
2. Lower the cordless blender into food and firmly press down on the POWER (
and the LOCK Button (
to begin blending.
NOTE: Always hold the immersion blender straight in a upright position to ensure
no ingredients being blended splash over.
3. When finished processing, stop the cordless blender by releasing the POWER (
and the LOCK (
4. To disassemble, press and hold the button above the arrow on the motor handle and detach
blending shaft from the motor handle. Release the button once. (See Figure 3)
CAUTION: Make sure the level of liquid or food in the container is below the joint of the
blender, as this could cause an electric shock.
) located at the top of the motor handle simultaneously in order
) on the back of the motor handle.
5
) button
) button