Publicidad
Idiomas disponibles
Idiomas disponibles
10
Table 4
RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE AND MOBILE
The scooters are intended to operate in an electromagnetic environment in which RF disturbances are
under control. The client or user of the scooters can contribute to preventing EM interference by ensuring
a minimum distance between the mobile and portable RF communications devices (transmitters) and
the scooter battery charger during charging and the internal scooter devices during their operation as
indicated below, in relation to the maximum output power of the radio communication equipment.
TESTS
SEPARATION DISTANCE AS A FUNCTION OF THE FREQUENCY OF THE TRANSMITTER (M)
During battery
Maximum
charging
rated output
power of
transmitter
from 150 kHz
(W)
to 80 MHz
d=[3,5/V1]√P
0.01
0.35
0.1
1.1
1
3.5
10
11
100
35
For transmitters whose maximum rated output power is not listed above, the recommended separation distance
d, in metres (m), can be calculated using the equation applicable to the transmitter frequency, where P is the
maximum rated output power of the transmitter, in Watt (W), as given by the transmitter's manufacturer.
NOTE 1: At 80 MHz and 800 MHz, apply the separation distance for the higher frequency band.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
RADIO COMMUNICATIONS EQUIPMENT AND THE SCOOTERS
During use of
During
the CN250-
battery
CN260
charging
Scooters
from 150 kHz
from 80 MHz
to 80 MHz
to 800 MHz
d=[3,5/V1]√P
d=[3,5/E1]√P
0.35
0.35
1.1
3.5
11
35
During use of
the CN250-
CN260
Scooters
from 80 MHz
to 800 MHz
d=[3,5/E1]√P
0.35
1.1
1.1
3.5
3.5
11
11
35
35
During use of
During battery
the CN250-
charging
CN260
Scooters
from 800 MHz
from 800 MHz
to 2.5 GHz
to 2.5 GHz
d=[7/E1]√P
d=[7/E1]√P
0.7
0.7
2.2
2.2
7
7
7.3
7.3
70
70
Publicidad
