KitchenAid POWER PLUS BLENDER 5KSB8270 Manual Del Propietário página 7

PRODUCT ASSEMBLY (CONTINUED)
2.
The main Power Switch is on the back of the Blender Base. Flip the Power Switch to I (on).
The Status Indicator Light above the start toggle button will begin to flash, indicating that
the Blender is in Standby mode. The Blender is now ready to operate.
PRODUCT USAGE
1. Put the items to blend into the Blender Jar. Add liquids first, then soft foods, then leafy
greens, and ice or frozen items last.
NOTE: Do not fill the Blender Jar beyond the "max fill" line, especially when blending
liquids.
2. Make sure that the Lid is fully secured on the Blender Jar. Next, place the Blender Jar on
the Base, making sure that it is fully aligned on the Jar Pad.
3.
Flip the (Start/Stop) Toggle Switch up or down to begin operation of the Blender. The
Status Indicator Light will now be solid.
4. Turn the Control Dial to your desired speed or program. See the "Blender Function Guide"
for more information.
NOTE: If you select a Pre-Programmed Cycle, you will need to flip the
Toggle Switch to begin operation. The Blender will automatically stop running once the
cycle is complete.
5.
Utilize the Flex Edge Tamper
Remove the Ingredient-Measuring Cap only, and leave the Lid in place. Stir or press
contents down towards the Blade. When you are finished, replace the Ingredient-
Measuring Cap to the Blender Jar.
6.
If desired, use the Pulse function for a momentary boost of speed while blending on the
variable speed settings. Press and hold the
or down for a slower pulse.
NOTE: The Pulse function
function while the Blender is in Standby mode. Pulse is not available when running a
preset program.
7.
After blending, flip the
come to a complete stop before removing the Lid and pouring your blended ingredients.
CARE AND CLEANING
Clean the Blender thoroughly after every use.
IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and
before cleaning the appliance.
NOTE: To avoid damaging the Blender, do not immerse the Blender Base or Cord in water. To
avoid scratching the Blender, do not use abrasive cleansers or scouring pads.
1.
To clean the Blender Base and Cord: Unplug the Blender before cleaning. Wipe the Base
and the Cord with a warm, damp, soapy cloth; wipe clean with a damp cloth, and dry with a
soft cloth.
2.
Make sure to clean the Blender Jar, Lid, Jar Pad, and Ingredient-Measuring Cap after each
use. Remove any remaining contents from the Blender Jar. Fill 1/3 of the Blender Jar with
warm water and add 1 drop of liquid detergent. Place the Lid on the Blender Jar, and make
sure the Blender Jar is fully in place on the Blender Base.
3.
Rotate the Control Dial to the Clean program. Flip the
down. When the program finishes, pour out the soapy water, and rinse the Blender Jar
with warm water. If any haze remains, clean with a soft cloth or sponge.
*Use the Tamper only when the Blender does not function.
accessory as needed for optimal blending performance.
*
may also be used on its own as a separate blending
(Start/Stop) Toggle Switch up or down. Allow the Blender to
(Pulse) Toggle Switch up for a faster pulse,
(Start/Stop) Toggle Switch up or
(Start/Stop)
7