General Safety; Health & Safety - Altrad Belle Group AFS 350 Manual Del Operador

Tabla de contenido

Publicidad

Safe Disposal.
Instructions for the protection of the environment. The
machine contains valuable materials. Take the discarded
apparatus and accessories to the relevant recycling
facilities.
For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following
safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely.
If you are unsure about the safe and correct use of the Floor Saw, consult your supervisor or Belle Group.
WARNING
This equipment is heavy and must not be lifted single-handedly, either GET HELP or use suitable lifting equipment.
Cordon off the work area and keep members of the public and unauthorised personnel at a safe distance.
Personal Protective Equipment (PPE) must be worn by the operator whenever this equipment is being used (see Health & Safety).
Make sure you know how to safely switch this machine OFF before you switch it ON in case you get into dif¿ culty.
Always switch OFF the engine before transporting, moving it around the site or servicing it.
During use the engine becomes very hot, allow the engine to cool before touching it.
Never leave the engine running and unattended.
Never remove or tamper with any guards ¿ tted, they are there for your protection. Always check guards for condition and security, if
any are damaged or missing, DO NOT USE THE FLOOR SAW until the guard has been replaced or repaired.
Do not operate the Floor Saw when you are ill, feeling tired, or when under the inÀ uence of alcohol or drugs.
Fuel Safety.
WARNING
Before refuelling, switch off the engine and allow it to cool.
When refuelling, DO NOT smoke or allow naked À ames in the area.
Spilt fuel must be made safe immediately, using sand. If fuel is spilt on your clothes, change them.
Store fuel in an approved, purpose made container away from heat and ignition sources.
Vibration.
Some vibration from the À oor saw operation is transmitted through the handle to the operator's hands. The Belle Group À oor saw has
been speci¿ cally designed to reduce hand/arm vibration levels. Refer to speci¿ cations & technical data for vibration levels and usage
times (recommended maximum daily exposure time). DO NOT exceed the maximum usage times.
PPE (Personal Protective Equipment).
Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear Defenders, Dust Mask and Steel Toe capped
footwear. Wear clothing suitable for the work you are doing. Tie back long hair and remove any jewellery which may catch in the equip-
ment's moving parts.
Dust.
The sawing process will occasionally produce dust, which may be hazardous to your health. Always wear a mask that is suited to the
type of dust being produced.
Fuel.
Do not ingest fuel or inhale fuel vapours and avoid contact with your skin. Wash fuel splashes immediately. If you get fuel in your eyes,
irrigate with copious amounts of water and seek medical attention as soon as possible.
Exhaust Fumes.
Do not operate the À oor saw indoors or in a con¿ ned space, make sure the work area is adequately ventilated.
WARNING

General Safety

Improper maintenance can be hazardous. Read and Understand this section before you perform any
maintenance, service or repairs.
Fuel is À ammable. It may cause injury and property damage. Shut down the engine, extinguish all open
À ames and do not smoke while ¿ lling the fuel tank. Always wipe up any spilled fuel.
Health And Safety
The exhaust fumes produced by this equipment are highly toxic and can kill!
Environment
Component
Handle
Front cover
Main frame
Baseplate
Hand Grips
Engine
Flexible Mounts
Various Parts
Water Bottle
15
Material
Steel
HDPE
Steel
Steel
Rubber
Aluminium
Steel and Rubber
Steel and Aluminium
Plastic

Publicidad

Tabla de contenido
loading

Tabla de contenido