Maintenance
Please check regularly that the rollers of the drive units are free of any dirt, or debris that may have
been picked up during use/during periods of inactivity.
Please check regularly the distance between the rollers and the tyres. In the neutral, fully disengaged
(Fig.5 or Fig.8) position this must be 20mm.
Once a year have your caravan movers maintained and visually inspected. This inspection must
include all the bolt/nut connections, the cables and electrical connections and lubrication of movable
parts/joints.
Long periods of inactivity generate the potential for elements of the movers to cease. Deal with this
accordingly by applying lubrication and removing oxidisation where necessary.
DO NOT use any form of pressurised water or chemical cleaning on your caravan movers.
When maintaining your motor mover system, be sure to isolate the electrical supply, failure to
do so could result in electrocution.
In case of any failures or problems, please contact your Caravan Mover supplier.
Product Registration
Please register your Quattro
simple, go to www.purpleline.co.uk/product-registration. Please retain your original purchase receipt.
Please fill-in the Serial Numbers + additional information and retain this manual for future
reference. The serial numbers can be found on the product label on each of the motor sections. The
serial number can be up to 18 digits long. Please make a note of your serial numbers in the section
below for future reference. The serial numbers will be required for product registration.
Motor Serial No.
Date of Purchase
Name of Dealer
caravan mover online within 14 days of purchase. Registration is quick and
®
EN 16