Sauder Worksense MASON PEAK Serie Manual Del Usuario página 14

Step 9
å
Push two SAUDER TWIST-LOCK® FASTENERS (37F) into
the large holes in the SMALL UPRIGHT (G).
å
Slide the SMALL UPRIGHT MOLDING* (J) onto the
notched edge of the SMALL UPRIGHT (G).
å
*U.S. Patent No. 5,499,886
37F
Page 14
Do not tighten the TWIST-LOCK® FASTENERS in this step.
G
Notched edge
427809
2
Slide the MOLDING (J)
onto the notched edge.
J
The groove
is closer to
this edge.
www.sauder.com/officeservice