Sauder Worksense MASON PEAK Serie Manual Del Usuario página 9

Step 4
å
Push two SAUDER TWIST-LOCK® FASTENERS (37F) into the
large holes in the LARGE UPRIGHT (F).
å
Fasten the EXTENSION BLOCK (M) to the LARGE UPRIGHT (F).
Use two SILVER 1-1/8" FLAT HEAD SCREWS (10S).
SILVER 1-1/8" FLAT HEAD SCREW
(2 used in this step)
www.sauder.com/officeservice
Do not tighten the TWIST-LOCK® FASTENERS in this step.
10S
37F
The small hole is
closer to this edge.
M
F
427809
2
Page 9