Hog Slat Grower Select HSES-RA Manual Del Usuario página 10

Evaporative Cooling System
Trough Cover Installation
11. Using supplied #10 X 1.5" supplied screws secure trough cover to top of bottom 2X10 while inserting to
cut section of trough. Start at the sump end and work towards the cap end. It may be necessary to cut
the trough cover to fit nonstandard rough opening lengths. If necessary, drill a second mounting hole to
ensure a minimum of 2 fasteners on a modified part.
Hog Slat Inc. Newton Grove, NC USA February 2019
10