Hog Slat Grower Select HSES-RA Manual Del Usuario página 13

Evaporative Cooling System
Spray Bar Assembly Instructions
ENSURE SUPPLIED TEFLON TAPE IS USED ANYWHERE A THREADED CONNECTION OCCURS
SPRAY BAR PLUMBING INSTRUCTIONS
17. Begin plumbing assembly by placing Spray Bars on Spray Bar Supports for the length of the system.
18. Align Spray Bar so holes are oriented as shown below.
19. Using self-tapping screws (60926), fasten spray pipe together to eliminate separation and rotation.
20. On the ends of the spray line, install a dog leg assembly as shown below. (If system has dual pumps this
step should be excluded)
Hog Slat Inc. Newton Grove, NC USA February 2019
13