Hog Slat Grower Select HSES-RA Manual Del Usuario página 15

Evaporative Cooling System
Float Valve Assembly Instructions
22. Install the float valve assembly as shown below
•
During set up of water level . set the height of the water by raising or lowering the entire valve
assembly
23. Finally, place the remaining 10" PVC Cap on the Sump Tank. A section of the cap will have to be
removed.
•
EXACT DIMENSION OF CUT SHOULD BE DETERMINED BY INSTALLER AS FEED PIPE AND SIZE
MAY VARY
Hog Slat Inc. Newton Grove, NC USA February 2019
15