Dimplex Pro Range Manual De Instrucciones página 7

Modes of Remote Operation
User Timer : Provides greatest flexibility to the user. Four times slots are available throughout the day and these can be
customised for each day of the week. See "How to adjust the timer modes" for instructions on adjusting these from the
factory default time periods & temperatures.
Manual Mode : This mode heats the room to the temperature you have set the remote control to.
Frost Protection : This mode will maintain a room temperature to 7°C. This mode should be used to provide protection
against frost as indicated by the frost icon.
Choosing and Setting a User timer Mode
User Timer - To re-programme the factory default Timer Modes: with the remote control activated, navigate UP/DOWN
button to user timer
1. Press Enter when
2. Press > Once EDIT icon blinks then press Enter
*Days of the weeks are now displayed at the top of the screen*
Day 1 = Monday
Day 2 = Tuesday
Day 3 = Wednesday
Day 4 = Thursday
Day 5 = Friday
Day 6 = Saturday
Day 7 = Sunday
4. Press > to navigate to the desired day and Press Enter to Select
5. P1 will be displayed on screen
6. Press Enter to select P1,or to navigate to P2, P3 or P4 press > and press Enter to select
7. ON will be displayed
8. Press < or > to adjust the ON Hour time, press Enter to Confirm
9. Press < or > to adjust the ON Minute time, press Enter to Confirm
10. Press < or > to adjust the Temperature setting, press Enter to Confirm 10. Press < or > to adjust the Temperature setting, press Enter to Confirm
11. OFF will be displayed 11. OFF will be displayed
12. Press < or > to adjust the OFF Hour time, press Enter to Confirm
13. Press < or > to adjust the OFF Minute time, press Enter to Confirm
Press Enter to modify Programme P2, follow steps 5-12, Press > to skip to P3
Press Enter to modify Programme P3, follow steps 5-12, Press > to Skip to P4
Press Enter to modify Programme P4, follow steps 5-12
To copy newly programmed P1-P4 heating programmes to other days, press and hold ADV button COPY will be
displayed then navigate UP/DOWN buttons to other days, while the day flashing press and hold ENTER button to paste,
PASTE will be displayed to confirm the setting.
Press BACK button user timer screen is displayed, navigate UP/DOWN button to flash ON and press ENTER to confirm
the user timer setting. During this setting product will turn off and turn on for the time you selected.
To turn of the User timer, activate the remote control, OFF flashes. Press ENTER to confirm.
is blinking
5