ExecutiveSafe ES035 Manual De Usuario página 3

PLEASE READ THE MANUAL ENTIRELY BEFORE START USING THE SAFE
Bolt-down instructions for Models ES035, ES045, ES060
To help provide maximum security, bolt down is strongly recommended.
1. Select a suitable and convenient location for your safe. Set the safe in place
and use the hole provided at the bottom of the safe to mark the
location of the hole to be drilled in the floor
2. Move the safe away and drill a hole in the floor, of the appropriate diameter and depth
for the type of hardware being used and the mounting surface
3. Place the safe back over the hole and install the fastener as required.
Using the override key to open the safe
Using your finger nail remove the override key cover, located at the front of the door, see Fig. 1,
Insert the override key and turn it clockwise until it stops.
Turn the handle counter clockwise (downwards) to open the door. To finish the operation, turn the
key counter clockwise and remove it.
Fig. 1
NOTE: DO NOT STORE THE OVERRIDE KEY IN YOUR SAFE!
Please secure your override keys in a safe place. If the override keys are lost or damaged,
contact your local ExecutiveSafe office.