DeLOCK 62495 Manual Del Usuario página 2

English
Description
This converter by Delock enables the connection of an mSATA SSD
in half size or full size format which can be used as a 2.5" HDD.
The converter will be installed into the system internally through a
IDE 44 pin interface.
Specification
• Connectors:
1 x IDE 44 pin male
1 x mSATA slot (full size)
• Form factor: 2.5"
• For 3.3 V mSATA module
• Supports ATA/ATAPI-7
• Supports ATA/ATAPI Ultra DMA mode
• Supports ATA/ATAPI PIO mode
• Jumper for selecting Master / Slave and Cable Select
• Latch for mSATA module, full size can fit in
• Dimensions (LxWxH): ca. 98 x 70 x 7 mm
• OS independent, no driver installation necessary
System requirements
• A free IDE 44 pin interface
Package content
• Converter
• 2.5" frame
• 4 x screws
• User manual
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when installing the product
-2-